Products
OUR PRODUCTS
Sodium Silicate
- Alkaline Sodium Silicate
- Neutral Sodium Silicate
Silica Gel
Loose Material according to size
- Silica Gel Indian
- Silica Gel Beads
- Blue Silica Gel
- Banslochan
Colloidal Silica
- Milky White
- Semi Transparent
Products based on colloidal silica for use in the construction industry.
1. Tatv Nanosil 30 –
This is a SCM which can replace micro silica in the concrete and give better strength of concrete and reduces the cost also. Please check the TDS for the details.
2. Tatv Grout NS708
(Solvent-free, low viscosity, hydrophilic grout for rock injection and consolidation of
sandy and silty strata)
TATV GROUT NS-708 is a one-component injection system, based on a nanometric colloidal
silica adhesion is also good to wet surfaces. The non-foaming product contains neither
solvents nor toxic components.
3. Tatv Spray-Seal EC28
It is an economical nano silica solution that penetrates into an unsealed cementitious surface to increase density, hardness, and strength of the top layer of a substrate while retaining its breathability.
4. Tatv Nano DI Admix
It is homogeneous colloidal slurry of amorphous Nano silicon dioxide specially made for
use
in high-quality Polymer coatings and mixes.
It can also be used for concrete surface spray densifier. It is also an additive for
deep
impregnating polymer based primers for use on floors and walls before the top coats.
5. Tatv PlastCon-kure cs32
(High Performance Internal Curing Additive for plaster, masonry & cementitious
Mortars)
Tatv PlastCon-kure cs32 is a high performance, internal curing system for Plastering &
Concrete designed to provide integral curing properties.
NANO SILICA BASE PRODUCTS
High-performance nano-silica grout providing exceptional bonding and durability, ideal for construction and industrial applications
An advanced nano-silica admixture designed to improve the mechanical strength, workability, and longevity of concrete and mortar.
A nano-silica-based solution engineered for enhanced surface protection, offering superior resistance to environmental wear and tear.
A curing and plasticizing agent that leverages nano-silica technology to ensure efficient hydration and reduced cracking in concrete structures.
A spray-on nano-silica sealant that creates a durable, water-resistant barrier, providing long-lasting protection for various surfaces.
Features And Benefits
- Concrete densification and surface finishing
- Self-compacting concrete
- Concrete with extremely high cohesion and resistance to washout
- Reduce the segregation in concrete
- High early strength
- Reduce the porosity of the concrete and makes it more impermeable
- Gives the mix a better resistance against chemical attacks (carbonation, sulphates, and chlorides)
- Increases the lifespan of concrete due to CH and CSH controlled reaction
- For internal curing, colloidal silica will gel immediately and form flocculation, generating a three-dimensional network under an alkaline environment such as cement pore solution
- Slows down the water evaporation rate due to floc network for motion
- Increases development of CH and CSH chemical binding of alkalis into hydrated cement matrix
TATV GROUT NS 708 - Product Specifications
Details on our top-performing colloidal silica grout.
| Properties | TATV GROUT NS 708 (30%) | TATV GROUT NS 708 (27%) | TATV GROUT NS 708 A (Accelerator) |
|---|---|---|---|
| Form | Liquid | Liquid | Liquid |
| Density (g/cm3) | 1.18-1.20 | 1.15-1.17 | 1.0-1.5 |
| Viscosity (cP) | 12-12.8 | 12.5-13 | 11-12 |
| SiO2 (%) | 30% ± 1 | 27% ± 1 | - |
| pH Value | 9.4-9.7 | 9.5-10.1 | 7.5-8.0 |
Application Guidelines: Adjust accelerator dosage to achieve desired gel time, based on temperature.
| Accelerator Volume (%) | Gel Time (minutes) |
|---|---|
| 5% | 120-150 |
| 10% | 60-80 |
| 15% | 20-30 |
| 20% | 2-6 |
Note: Gel time may vary with temperature changes.
Key Benefits: Single-component, low viscosity, eco-friendly, with excellent adhesion to wet surfaces and adjustable gel time.
Typical Applications: Suitable for rock, sand, and silt pre-injection, soil consolidation, passive grout stabilization, and tunnel waterproofing.
Tatv Nano-Sil Products
A comprehensive guide to our Nano Silica-based product offerings.
Tatv Nano-Sil 30®
Description: Tatv Nano-Sil 30® is a homogeneous colloidal slurry of amorphous nano silica specially formulated for high-quality cementitious concrete mixes. It increases strength and durability, creating Nano Enhanced Concrete (NEC) with high strength and lower porosity.
Usage
- High-performance shot-creting
- Concrete densification and surface finishing
- Injection grouting
- Self-compacting concrete (SCC)
- Non-polluting and non-hazardous alternative to powder silica additives
Technical Parameters
- Consistency: Liquid in suspension
- Color: Off white, transparent
- Density: 1.20 ± 0.03 g/m³
- Specific surface area: 250 - 350 m²/g
- Dry solids content: 30 ± 1%
- pH: 9.5 - 10.5
- SiO2 content: 30 ± 1%
Packaging and Storage
- Available in 250 kg barrels, 1300 kg IBC tanks, and bulk quantities
- Store between +5°C and +35°C. Protect from frost.
Tatv Spray-Seal EC28
Description: Tatv Spray-Seal EC28 is a nano-silica based penetrative product for reducing permeability in cement plasters and concrete, enhancing durability.
Usage
- Curing and protecting fresh concrete
- Treating clean, hardened, permeable concrete or plaster
- Increased resistance to salts, efflorescence, and carbonation
Technical Parameters
- Consistency: Liquid in suspension
- Color: Off white, transparent
- Density: 1.15 ± 0.03 g/m³
- Specific surface area: 300 - 400 m²/g
- Dry solids content: 20 - 40%
- pH: 9.5 - 11
Packaging and Storage
- Available in 60 kg, 220 kg barrels, and 1200 kg IBC tanks
- Store between +5°C and +35°C. Protect from frost.
Tatv Nano DI Admix
Description: Tatv Nano DI Admix is a colloidal slurry of amorphous nano silicon dioxide for high-quality polymer coatings and concrete densification.
Usage
- High-performance polymer coatings
- Concrete surface densifier
- Deep impregnating polymer-based primers
Technical Parameters
- Consistency: Liquid in suspension
- Color: Off white, transparent
- Density: 1.15 - 1.20 g/m³
- Specific surface area: 180 - 250 m²/g
- Dry solids content: 16 - 30%
- pH: 3.5 - 6
Packaging and Storage
- Available in 60 kg drums, 250 kg barrels, and 1300 kg IBC tanks
- Store between +5°C and +25°C. Protect from frost and direct sunlight.
Tatv PlastCon-Kure cs32
Description: Tatv PlastCon-Kure cs32 is a high-performance internal curing additive for plaster, masonry, and cement mortars, providing waterproofing and enhanced durability.
Usage
- Internal curing for plaster and masonry
- Eliminates need for traditional curing methods
- Improves hydration, reduces cracking and increases durability
Technical Parameters
- Consistency: Liquid in suspension
- Color: Off white, transparent
- Density: 1.17 - 1.20 g/m³
- Specific surface area: 250 - 350 m²/g
- Dry solids content: 26 ± 1%
- pH: 9.5 - 11.0
Packaging and Storage
- Available in various quantities including bulk
- Store between +5°C and +35°C. Protect from frost.